Embedded planning tool

Garage Door Replacement Cost & Scope Planner

Choose an exact published configuration and material row, then mark scope questions for the quote. The planner returns independent references—not a calculated contractor price.

Project and quote scope

Describe the replacement

7 decisions

This selects an independent Angi per-door reference; it is not added to the configuration range.

No ZIP or state adjustment, hidden multiplier, interpolation, source averaging, material addition, or automatic scope-item total.

Start with one shared door and opening record

Use the same opening record for both bids, then map each written promise to the matrix below. This is a manual scope normalizer: it identifies matching descriptions, different work and unanswered questions before totals are compared. The two offers and all measurements below are fictional editorial examples, not real bids, inspected conditions or product recommendations. No price is assigned.

Clopay's How to Install a Garage Door, under How to Measure for Your New Residential Garage Door, identifies opening width/height, left/right sideroom, headroom and backroom. Its Choosing the Right Door section discusses new track and hardware matched to the door. These are measurement and scope prompts only: the selected door, track, spring system, opener and obstructions need professional confirmation against applicable product instructions. No example dimension here establishes a universal clearance, fit or approval. See the original Clopay reference in Sources and limitations; its historical verification date is retained.

Shared fictional project GD01 supplied to both bidders
RecordDeclared planning inputEvidence and confirmation owner
Opening count and configurationGD01: one existing opening; replace one double sectional door. No opening enlargement requested.Fictional owner brief P1. Both bidders must confirm opening ID and configuration in their revised offers.
Opening width and heightOwner-reported width 15 ft 6 in; height 7 ft 3 in. Ordering dimensions unknown until verified.P1 sketch, not a field survey. Final measurement/sign-off responsibility is not assigned in either offer; name the installer who will verify it before ordering.
Left and right sideroomOwner reports left 5 in and right 6 in. Track, attachment surfaces and obstructions not assessed.P1 notes. Installer to record both sides at the relevant locations and confirm the proposed system; these figures are not minimum requirements.
Headroom and backroomOwner reports headroom 11 in at one ceiling point and backroom 19 ft 6 in toward the rear wall. Clearance under a boxed beam and along the opener route is unknown.P1 notes. Installer to verify limiting obstructions and required space for the specified hardware/opener; do not infer fit from one reading.
Door, material and insulationRequested insulated steel sectional door, white finish, no glazing. Manufacturer, series, construction, insulation type/rating and product suitability unknown.Shared specification P2. Both offers repeat this description; matching material words do not establish the same product.
Operating system and site boundaryRequest new matched tracks/springs and any product-specified struts. Retain the existing opener if professionally confirmed suitable; model/condition unknown. No framing or electrical alteration requested; need remains unknown.P2. Ask both bidders to identify components, assessment responsibility and exceptions. Do not operate or dismantle the system to complete this record.

Read the two fictional offers before assigning statuses

Included means the offer expressly covers the named work, subject to its written boundary. Excluded means the offer expressly leaves it out. Allowance means provisional coverage with limits still to define; it is not a fixed inclusion. Unknown means the offer does not establish coverage, specification or responsibility. Unknown is not zero, free work or an exclusion. A scope can be Included while its exact product or terms remain Unknown.

The clause references below are synthetic evidence from offers A and B, not publisher facts. Installer A and Installer B are fictional responsible parties only for work their clauses promise. Where neither offer assigns someone, the matrix says unassigned. The homeowner's request is not evidence that a bidder included it.

Fictional offer evidence against the same GD01 brief
OfferWritten scope used for this exercise
A — bundled door and hardwareA §1: Installer A supplies and installs the requested insulated steel door with new tracks and springs in one door/hardware package; no model or struts stated. A §2: Installer A removes the old door; owner arranges haul-away. A §3: opener work, electrical and framing excluded. A §4: Installer A supplies perimeter/bottom weather seals; trim restoration excluded. A §5: Installer A supplies product-warranty documents; workmanship terms unstated.
B — door with separate hardware linesB §1: Installer B supplies and installs the requested insulated steel door; no model stated. B §2: new tracks and springs listed separately by Installer B; breakdown versus additional charge unstated. B §3: Installer B offers allowances for struts/reinforcement and local trim restoration; quantities and limits unstated. B §4: Installer B reconnects the retained opener; new electrical work excluded. B §5: Installer B removes the old door; disposal unstated. B §6: Installer B supplies product-warranty documents; workmanship terms, framing and weather seals unstated.

Normalize both offers into the same scope matrix

Read each cell as status, supporting clause and responsible party. Separate product identity from coverage, and removal from disposal. The final column is the next written question, not an installation procedure or a contractor ranking. Reuse these rows with the clause/page references from your own offers; keep an unanswered row Unknown until a written revision resolves it.

GD01 scope matrix: Included, Excluded, Allowance and Unknown
Scope itemOffer A — status, evidence, responsible partyOffer B — status, evidence, responsible partyComparison and next question
Opening count, dimensions and sign-offUnknown: final GD01 measurements/sign-off not stated. P1 only; responsible measurer unassigned.Unknown: final GD01 measurements/sign-off not stated. P1 only; responsible measurer unassigned.Both received one double-opening brief. Who verifies width/height and approves ordering dimensions, and where is that signed record?
Clearances and obstructionsUnknown: neither system-specific clearance review nor assessor stated. P1 only; assessor unassigned.Unknown: neither system-specific clearance review nor assessor stated. P1 only; assessor unassigned.Who records left/right sideroom, headroom and backroom at limiting obstructions and checks the proposed track/opener instructions? The boxed beam remains unresolved.
Door, material and insulationIncluded: insulated steel door supplied by Installer A, A §1. Exact model, construction and insulation specification Unknown.Included: insulated steel door supplied by Installer B, B §1. Exact model, construction and insulation specification Unknown.Description matches; same product not established. Both: which exact product is included? Attach manufacturer/series, construction, insulation type/rating, dimensions, finish and applicable product documentation.
Tracks and hardwareIncluded: new tracks in door/hardware bundle, A §1; Installer A. Track specification and remaining hardware list Unknown.Included: new tracks on separate line, B §2; Installer B. Track specification and remaining hardware list Unknown.Both: list the matched track and hardware package. B: is the separate line a breakdown of B §1 or an extra? Do not add it twice.
SpringsIncluded: new springs within bundle, A §1; Installer A. Selected system/specification Unknown.Included: new springs on separate line, B §2; Installer B. Selected system/specification Unknown.Both: which qualified garage-door professional specifies the matched system and installs it? B: resolve bundle overlap. No spring adjustment or replacement steps are provided here.
Struts / reinforcementUnknown: generic hardware wording does not identify struts, A §1. Specification and responsible party unassigned.Allowance: struts/reinforcement by Installer B, B §3; quantity, specification and limit Unknown.A: what product-specified reinforcement is covered, and by whom? B: define strut quantity/specification, allowance boundary and change approval. An allowance does not prove suitability.
Installation labor and handoffIncluded: door installation by Installer A, A §1. Setup/testing and completion record Unknown.Included: door installation by Installer B, B §1. Setup/testing and completion record Unknown.Both: who owns professional setup/testing, site protection, cleanup and completion handoff? Separate labor detail must not duplicate installed coverage.
Existing or new openerExcluded: opener work, A §3. Owner to appoint a separate opener professional; currently unassigned.Included: retained-opener reconnection by Installer B, B §4. Suitability assessment and replacement if unsuitable Unknown.Different work. A: who assesses and reconnects it? B: who confirms model, condition, door compatibility and safety setup, and what happens if reuse is unsuitable? Neither offer includes a new opener.
Old-door removalIncluded: removal by Installer A, A §2; hauling expressly separate.Included: removal by Installer B, B §5; hauling coverage Unknown.Both: what are the removal boundary and handling/protection responsibilities? Removal does not establish disposal or opening repair coverage.
Disposal / haul-awayExcluded: owner arranges hauling, A §2; hauler unassigned.Unknown: disposal not stated, B §5; responsible party unassigned.A: name the hauler and collection boundary. B: who transports/disposes of the removed door and debris? B's silence must remain Unknown, not Included or Excluded.
Framing / opening changesExcluded: framing, A §3. If needed, owner must appoint an appropriate professional; currently unassigned.Unknown: framing not stated, B §6; responsible party unassigned.Both: who assesses jamb/header condition and documents any required repair or opening change before approval? No structural diagnosis or change is authorized by this example.
ElectricalExcluded: electrical work, A §3; separate electrical party unassigned.Excluded: new electrical work, B §4; separate electrical party unassigned.Both: who checks existing power and defines any separately needed electrical work? Opener reconnection does not establish electrical coverage or code compliance.
Trim / finish restorationExcluded: trim restoration, A §4; owner-appointed finish party unassigned.Allowance: local trim restoration by Installer B, B §3; extent/materials/finish limits Unknown.A: who restores disturbed surfaces? B: list profiles, affected surfaces, painting and allowance limits. Define where framing repair ends and trim starts.
Weather sealsIncluded: perimeter/bottom seals by Installer A, A §4; exact product Unknown.Unknown: weather seals not stated, B §6; supplier/installer unassigned.A: which seals are specified? B: who supplies and fits them? Both: separate seals from trim restoration without duplicating an included installation task.
Warranty and responsibilityIncluded: product-warranty paperwork from Installer A, A §5. Actual coverage, exclusions and labor warranty Unknown.Included: product-warranty paperwork from Installer B, B §6. Actual coverage, exclusions and labor warranty Unknown.Both: who handles a product defect versus installation or finish failure? Attach actual product/workmanship terms, claimant contact and remedy responsibility for door, hardware, opener and finish. Paperwork is not proof that every task is covered.
Permits / inspections / taxesUnknown: no clause supplied; applicability, coverage and responsible party unassigned.Unknown: no clause supplied; applicability, coverage and responsible party unassigned.Both: who confirms any local permit/inspection needs, handles them if applicable and states tax treatment? No universal requirement or local fee is inferred.

Resolve the differences without adding overlapping work

The normalized finding: both offers promise an insulated steel door, tracks, springs, removal and product-warranty paperwork. They do not yet establish the same exact assembly, clearance suitability or workmanship warranty. A leaves opener work and hauling with the owner; B offers reconnection but leaves disposal Unknown. B's strut/trim allowances are provisional, while A leaves struts Unknown and trim Excluded. Neither is a confirmed complete project scope.

Ask A for a component schedule identifying struts, final-measurement ownership, an opener assessment/reconnection handoff and a named hauler/finish party. Ask B to identify whether its track/spring lines are a breakdown or extra work, define strut/trim allowance limits, assign disposal and specify weather seals. Ask both for the same exact product schedule, obstruction review, warranty terms and written approval process for discoveries. Keep unanswered work outside any claimed complete project total.

Overlap rule: a bundled door/hardware installation and its track, spring or labor breakdown describe the same work until the bidder explicitly separates scope. Struts may already belong to the hardware specification; opener mounting reinforcement may overlap that strut line. Removal may already cover handling; hauling is separate only when expressly defined. Trim, seals and framing restoration need distinct boundaries. An allowance replaces its defined provisional scope when resolved; it is not another automatic addition. Unknown carries no amount, including no zero placeholder.

Keep the existing published references and planner separate from this exercise. Configuration and material references may overlap, and standalone removal/opener/labor references can overlap installed coverage. Do not add, multiply or average publisher rows to fill these gaps. Revise the written scope first; this manual comparison does not calculate a normalized price, choose a contractor or certify compatibility.

Contrast two single doors with one double door

This second fictional project is a separate alternatives exercise, not a change silently applied to GD01. The existing layout has two single openings S1 and S2, each owner-reported as 7 ft 6 in wide by 7 ft 3 in high. Alternative S retains both openings with two replacement single doors. Alternative D proposes one double opening D1, with a requested width 15 ft 6 in and height 7 ft 3 in. Those are hypothetical requested dimensions, not a conversion formula or an approved opening; center-pier/header conditions, structural feasibility and final dimensions are Unknown.

Both alternatives request the same insulated steel construction/finish family, with exact products still Unknown. Start a new pair of bids against each alternative's inventory and use the same four statuses and evidence/responsibility fields. The tasks below change with opening configuration; comparing two singles to a double cannot be reduced to multiplying a per-door price. These alternatives are never added together.

Configuration changes the work: two singles versus one double
TaskAlternative S — retain two singlesAlternative D — propose one doubleEvidence / responsible party / question
Opening survey and clearancesTwo separate width/height records, S1 and S2. Left/right sideroom, headroom and backroom Unknown at each opening; measure the shared center area for both track paths.One proposed D1 width/height record; final size and all clearances Unknown. Review the proposed single track path, obstructions and opener route.Fictional brief C1; surveyor unassigned. Who signs off each opening's measurements and system-specific clearances before ordering? No clearance is transferred from S1/S2 to D1.
Door and insulation scheduleSpecify two complete single-door products by opening, including any difference in construction, insulation, finish or access.Specify one complete double-door product; matching material/insulation words do not establish the same construction or reinforcement.C1 request; exact products Unknown, supplier unassigned. Which model/specification is offered for each opening and who verifies product suitability?
Tracks and springsDefine two matched operating assemblies, one per door, and review center-area attachment/track space. Do not assume one kit serves both.Define one assembly matched to the proposed double door; do not reuse a single-door track/spring specification by arithmetic.C1 alternatives; hardware coverage Unknown, garage-door professional unassigned. Which track/spring packages and installation responsibilities belong to S1, S2 or D1?
Struts and opener reinforcementIdentify manufacturer-specified struts/reinforcement for each single door; one opening's schedule cannot stand for the other.Identify the double-door strut/reinforcement schedule and opener interface; quantities/specifications Unknown, not automatically twice a single-door schedule.No product documentation yet; coverage Unknown, specifier unassigned. Is reinforcement already in each door/hardware package, and where is any allowance bounded?
Opener and electrical handoffTwo existing opener positions are reported; models/condition Unknown. Assess retention/reconnection or replacement independently at S1 and S2, including power at both positions.One proposed opener position; reuse suitability, mounting route and power provision Unknown. Define what happens to the two old openers.C1 owner report; opener/electrical scope Unknown, parties unassigned. Who assesses each retained/new opener and who handles any separate electrical work?
Removal and disposalRemove two old single doors; identify each retained or removed opener and the shared hauling/cleanup boundary.Also starts with two old single doors to remove, despite one proposed replacement. Define any additionally removed center-area material separately if a change is approved.C1 existing inventory; removal/disposal coverage Unknown, remover/hauler unassigned. Which old components and debris are covered? One new door does not mean one old door removed.
Framing / center pier / approvalsNo opening conversion requested; jamb/header condition and repair needs at both openings remain Unknown.Opening conversion proposed. A qualified professional must assess center pier/header and feasibility; any design, approvals, opening work and sequencing remain Unknown. No structural solution is supplied.C1 requested alternatives; assessment/repair coverage Unknown, professionals unassigned. Who establishes feasibility and obtains any required approvals before D1 can be treated as an orderable replacement?
Trim, seals, warranty and closeoutDefine trim/seals around two opening perimeters and workmanship/product handoff for both systems. Shared visits or hauling stay project-level where stated.Define restoration of changed surfaces and trim/seals at the proposed new perimeter, plus warranty and closeout for the new system and separately approved opening work.C1 only; coverage/terms Unknown, parties unassigned. Who restores each surface and handles each warranty? Do not duplicate shared setup or hauling across opening lines.

Published garage-door replacement cost ranges

HomeGuide publishes installed ranges for a single door, a double door, and a three-car single-plus-double configuration. It also publishes a total installed range that explicitly excludes optional costs. Ramefor does not reconstruct that total from the separate component endpoints or add optional values to a size row.

Angi publishes a headline per-door range and reported average plus five size/configuration rows that its table labels “Cost Range per Door.” Those Angi figures remain independent from HomeGuide because the publishers use different units and scopes.

Independent published garage-door replacement references
Published referenceValueWhat it measures
Single garage door — installedHomeGuide$700–$2,700Literal installed range for one single garage door.
Double garage door — installedHomeGuide$1,000–$3,500Literal installed range for one double garage door.
Three-car garage, one single plus one double — installedHomeGuide$1,700–$6,200Literal installed range for a single-plus-double three-car configuration.
Published total installed costHomeGuide$700–$3,500Published total that explicitly excludes optional costs; not reconstructed by Ramefor.
Headline replacement rangeAngi$754–$1,706/doorAngi's headline replacement range per door, separate from configuration rows.
Reported averageAngi$1,230/doorAngi's reported average per door, not a Ramefor midpoint.
One-car garageAngi$500–$3,000/doorAngi's one-car row, labeled per door by the publisher.
Two-car garage — one double doorAngi$800–$5,000/doorAngi's two-car, one-double-door row, labeled per door by the publisher.
Two-car garage — two single doorsAngi$1,200–$4,900/doorAngi's two-car, two-single-door row, labeled per door by the publisher.
Three-car garage — one double plus one single doorAngi$1,400–$7,000/doorAngi's three-car, double-plus-single row, labeled per door by the publisher.
Three-car garage — three single doorsAngi$1,700–$7,200/doorAngi's three-car, three-single-door row, labeled per door by the publisher.

Single, double, and multiple-single configurations are not interchangeable

A two-car garage with one double door is a different published row from a two-car garage with two single doors. The same distinction applies to a three-car single-plus-double layout and three separate single doors. The planner returns only the selected Angi row, with the publisher's per-door unit preserved.

HomeGuide publishes separate installed project/configuration references for one single door, one double door, and a three-car single-plus-double configuration. When one applies to the selected layout, the planner shows it as a different-unit companion to the Angi per-door row. Ramefor does not convert, multiply, average, or reconcile the two sources, and it does not multiply a single-door range to invent a missing multiple-single result.

Material and insulation decisions need their own product scope

Angi's material ranges are per-door references. A selected material still overlaps the publisher's per-door size/configuration reference, so the planner displays it as context and never adds the two ranges.

Ask each bidder to identify the proposed door construction, finish, window design if any, insulation specification if selected, hardware package, track, seals, and product warranty. A material label by itself does not make two products or quotes directly comparable.

Angi material-based references per door
Published referenceValueWhat it measures
Aluminum doorAngi$600–$2,900/doorIndependent per-door material context; not added to a configuration range.
Wood doorAngi$900–$4,500/doorIndependent per-door material context; not added to a configuration range.
Steel doorAngi$650–$3,200/doorIndependent per-door material context; not added to a configuration range.
Faux wood or composite doorAngi$650–$4,800/doorIndependent per-door material context; not added to a configuration range.
Vinyl doorAngi$800–$2,500/doorIndependent per-door material context; not added to a configuration range.
Fiberglass doorAngi$800–$2,700/doorIndependent per-door material context; not added to a configuration range.
Glass doorAngi$2,500–$8,000/doorIndependent per-door material context; not added to a configuration range.

What installation may include or exclude

Clopay says to measure the opening width and height and explains that a replacement typically uses new track and hardware designed for the new door. Confirm whether the proposal includes those compatible parts rather than assuming the existing track will remain.

Ask whether the base price covers the door, hardware, track, springs, installation labor, delivery, setup, weather seals, finish work, cleanup, haul-away, opener connection, permits, inspection, and taxes. The publisher's label cannot define a contractor's actual inclusions.

Published component and scope references kept outside the planner result
Published referenceValueWhat it measures
Garage door and hardwareHomeGuide$400–$2,500Door and hardware component context, not an installed total.
Installation laborHomeGuide$200–$500Standalone labor context that may overlap an installed range.
Installation laborAngi$200–$500Angi labor context, kept independent from HomeGuide.

Opener, removal, permit, framing, and electrical scope

The planner shows published removal, opener, and permit references only as separate scope context. They are not automatically added because a HomeGuide installed reference or Angi per-door configuration reference may already overlap some of that work and a contractor's inclusions can differ.

Opening changes can involve the header, jambs, framing, finish restoration, or a different rough opening. A new opener location or power need can involve electrical work. The supplied sources do not provide a complete auditable price model for those conditions, so the planner flags them for a site-specific quote without assigning a dollar amount.

Standalone removal, opener, and permit references
Published referenceValueWhat it measures
Old garage door removalHomeGuide$50–$250Standalone HomeGuide removal context; not added.
Old-door removalAngi$50–$200Standalone Angi removal context; not averaged with HomeGuide.
Garage door opener installationHomeGuide$300–$900Standalone HomeGuide opener-installation context; not added.
Automatic opener add-onAngi$200–$1,300Standalone Angi automatic-opener context; not averaged with HomeGuide.
Permit or inspectionHomeGuide$50–$250Permit or inspection context; local requirements still need verification.
Permit, if requiredAngi$40–$120Permit context only if required; not a local requirement or fee.

Repair versus replacement is a condition-and-scope decision

A repair may address a defined component while keeping the existing door system. Replacement changes the product and normally requires confirming compatible track and hardware, opening dimensions, opener integration, and safe installation scope.

Do not use an unsupported percentage rule to decide between them. Ask a qualified professional to identify the failed or damaged components, the condition of the remaining system, available compatible parts, safety concerns, warranty implications, and the scope and price of each option in writing.

Garage-door quote comparison checklist

  • Opening and configuration: measured width and height, one single, one double, two singles, or the stated three-car layout.
  • Door product: manufacturer, model, material, construction, insulation specification, finish, windows, wind or other specified product requirements, and warranty.
  • Operating system: new compatible track, hardware, springs, seals, opener model, controls, safety features, setup, and testing.
  • Site work: removal, haul-away, delivery, framing or jamb changes, finish restoration, electrical work, permits, inspection, taxes, protection, and cleanup.
  • Commercial terms: fixed scope, allowances, exclusions, change-order approval, payment schedule, lead time, product warranty, and labor warranty.

Professional installation and high-tension spring safety

DASMA recommends professional installation and warns that garage-door spring systems are under high tension and can be hazardous. This planner provides budgeting and quote-scope guidance only; it does not provide DIY spring replacement instructions.

Keep people clear of an unsafe or damaged system and have a qualified garage-door professional define the repair or replacement work, compatible components, safe setup, and testing procedure.

Why garage-door replacement quotes differ

Quotes can describe different opening configurations, door products, insulation choices, windows, finishes, track and hardware packages, opener work, removal, framing, electrical work, permits, cleanup, warranties, and exclusions. Site measurements and the condition of the opening can also change what is actually proposed.

Compare configuration references and material context separately, then normalize the written scope. A lower headline is not directly comparable if product specifications, compatible hardware, removal, opening work, electrical needs, or permit responsibility remain unresolved.

Methodology and source limitations

Ramefor stores the publishers' literal values with their units, scope, source links, and verification dates. It does not interpolate between configurations, multiply a single-door row, average publishers, add material or optional-scope rows, or apply a ZIP, state, quality, labor, or regional multiplier.

The result is a planning reference, not a contractor quote. A professional still needs to measure the opening, inspect site conditions, specify the product and compatible system, and define every inclusion and exclusion.

Sources, review dates, and limitations

Each source supporting the figures, definitions, or freshness rules on this page is registered below. Published values remain separate when their definitions or research methods differ.

HomeGuide

Garage Door Installation Cost

Source published/updated
Ramefor verified

How we use it: Ramefor displays HomeGuide's size ranges and scope references independently; optional figures never change a planner configuration range.

Scope and limitations
  • HomeGuide publishes literal installed ranges by single, double, and three-car single-plus-double configuration.
  • Its door-and-hardware, labor, removal, permit or inspection, and opener figures are standalone scope references and may overlap an installed range.
  • The published installed total explicitly excludes optional costs. Ramefor preserves it as published and does not reconstruct it from component endpoints.

Angi

Garage Door Replacement Cost

Source published/updated
Ramefor verified

How we use it: Ramefor returns Angi's literal selected configuration and material rows, then shows scope references separately without creating a total.

Scope and limitations
  • Angi's headline per-door range, reported average, configuration rows, material rows, and scope-item references answer different questions.
  • Material references overlap configuration ranges and are not additions to them.
  • Ramefor does not average or blend Angi values with HomeGuide values and applies no location adjustment.

Clopay

How to Install a Garage Door

Source published/updated
No editorial date displayed
Ramefor verified

How we use it: Ramefor uses Clopay only to frame opening measurements and compatible new track and hardware scope.

Scope and limitations
  • Clopay says to measure the garage opening's width and height when planning the door.
  • Clopay explains that a replacement typically uses new track and hardware designed for the new door.
  • This source supplies measurement and product-scope context only, not pricing.

Door & Access Systems Manufacturers Association (DASMA)

Garage Door System Safety Tips

Source published/updated
No editorial date displayed
Ramefor verified

How we use it: Ramefor uses DASMA for professional-installation and high-tension spring safety guidance only.

Scope and limitations
  • DASMA recommends professional garage-door installation.
  • DASMA warns that garage-door spring systems are under high tension and can be hazardous.
  • Ramefor provides no DIY spring replacement instructions.

An orientation, not an estimate

These national references do not account for your location, taxes, existing conditions, product selections, contractor availability, or final scope. Get itemized local quotes before making a financial decision.

Review how sources and calculator scenarios are selected